Reverse osmosis water purifier
The water purifying system produced by our company for such industries as cosmetics, pharmacy, food and electronics has been deeply favored by users for its stable water quality and simple operation. The system solves the troubles of frequent regeneration and cleaning during the use of ion exchanging water purifier. By adopting physical principle, it enables the water to pass the reverse osmosis film with a diameter of one ten-thousandth of a micron and separates impurities, ion, microbes and colloids in the water, so as to meet the water requirements in cosmetics, pharmacy, electronics and food industries.
Performance and Characteristics:
◆ Continuous water production without the need of regeneration, reducing labor strength;
◆ Ultra-low pressure film imported from USA, with a high desalting rate of 97~98%;
◆ Removing 98% of organic matters and bacteria, with a heat source of more than 98;
◆ On-line electric conductivity monitoring, ensuring good water quality;
◆ PLC microcomputer monitoring, flushing the reverse osmosis film at regular intervals.
Base Technical description:
|
Model
|
Productivity
|
Power
|
Recycle rate
(%)
|
Conductivity
(us/cm)
|
Raw Water Conductivity
(us/cm)
|
|
LRO-0.5
|
0.5T/H
|
2.2kw
|
50
|
3-8
|
≤300
|
|
LRO-0.5A
|
0.5T/H
|
2.2kw
|
50
|
3-8
|
≤300
|
|
LRO-1
|
1T/H
|
2.5kw
|
65
|
3-8
|
≤300
|
|
LRO-2
|
2T/H
|
4.0kw
|
65
|
3-8
|
≤300
|
|
LRO-3
|
3T/H
|
4.0kw
|
75
|
3-8
|
≤300
|
Flow Chart:
Water source → pressure pump → Manganese Sand Filters → active carbon filter →security filter → high pressure pump → anti-penetration film element → purifying water tank
